How to wax a car | four (4) easy ways to apply car wax

85 / 100

It’s not everyone that’s got much time to spend on car detailing; so, some people seek for the easy ways to do that. Apparently, you are going to spend 2 -8 hours to wax a car. Yes, it takes time because you need to pay attention to every part. However, if you’re looking for easy tips on how to wax a car, you’re reading the right blog.

Why Should You Wax Your Car?

Waxing a car simply means to add a layer of protection to the car paint’s clear coat. Car waxing compounds are also formulated to enhance your car paint’s appearance by restoring shine, glossiness, and removing swirl marks or minor scratches.

Here, I have provided the easiest way to apply car wax to different cars.

Materials for Waxing

  • Waxing compound
  • Buffer pad or microfibre towel
  • Soft detailing brush
  • Car wash materials

How To Wax A Car – Four (4) Easy Steps To Follow

easy way to apply car wax

First things first, you need to purchase a vehicle waxing compound. 3M and Meguiar’s products are recommended.

Related Topic  How to use Android File Transfer

Estimate Cost : USD

Time Needed : 3 hours 00 minutes

This practice will take up to three (3) hours and would cost around $100 – $200 to purchase all the necessary waxing items.

  1. Wash The Car Thoroughly

    The first step to waxing a car is to carry out a thorough wash to clean every part of the car. This must be a manual wash and has to be done within the area where you’d be waxing the car.After the wash, dry the car with a microfiber towel to avoid mint. Using a microfiber towel will also help prevent new scratches from appearing on the car.

  2. Ready The Waxing Gears

    Get out the waxing compound and the pad or microfiber towel you’ll be using to apply the wax.

  3. Apply The Wax

    It is advisable to read the instructions on the waxing compound’s bottle and follow keenly. However, the general way to apply car wax is to pour the compound to the buffer pad or towel and rub it on a selected part of the car.You need to apply the compound little by little, and you should focus on a small area of your car’s body at a time.Start from the front fender area and apply in sections. Waxing takes time because the compound needs to be applied to a small area at a time.Note: apply the wax following a circular motion – unless stated otherwise in the manufacturer’s instructions.

  4. Remove Immediately

    When you’re done applying wax to a section, use another clean micro-fiber towel and wipe-down the area after a few seconds. Do not allow the wax to sit for a long time before removing it. Also, you shouldn’t use a dirty or damp cloth/towel to wipe-down the waxed area. Instead, use chamois or microfiber towels. You can use a buffing pad for this purpose, too.

What More?

This is how to wax a car in simple steps. You just need to get all the necessary items and you’re good to go. Ensure to pay attention to every section as you apply the wax. Get some other handy car accessories to get the most of your car.

Originally posted on December 1, 2020 @ 7:47 pm

Samuel Odamah

We wake up to new tech innovations. All I'm doing is trying to get acquainted with cutting-edge innovations, write about them, as well as deploy them in solving my everyday problems. Follow me on Twitter @fwesh_finnest for my daily updates on Tech, Bitcoin, marketing, etc.

Related Articles

Leave a reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top button
Enable Notifications OK No thanks